| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| fabwiki:research:formwork_applications [2018/05/08 18:23] – external edit 127.0.0.1 | fabwiki:research:formwork_applications [2023/10/18 16:28] (current) – [External Links] rpschmitz |
|---|
| ====== Fabric Formwork Applications ====== | ====== Fabric Formwork Applications ====== |
| |
| <align justify><fs medium>The previous article covered but several of the examples where a flexible fabric formwork has been put to practical use forming architectural applications. Fabric forming applications include:</fs></align> | ### |
| | <fs medium>The previous article covered but several of the examples where a flexible fabric formwork has been put to practical use forming architectural applications. Fabric forming applications include:</fs> |
| | ### |
| |
| * <fs medium>Foundations</fs> | * <fs medium>Foundations</fs> |
| * <fs medium>Coastal and river structures</fs> | * <fs medium>Coastal and river structures</fs> |
| | |
| <align justify><fs medium>While it’s true that a flexible fabric formwork may be used nearly anywhere a rigid formwork is used, a significant amount of research remains to be done to bring these systems into everyday practical use by the construction industry. ACI (American Concrete Institute) Committee 347 has addressed rigid formwork since 1963 but it was only recently (2005) that ACI Committee 334 introduced the construction of shells using inflated forms even though several methods of construction using inflated forms have been available since the early 1940’s. It is hoped standards and guidelines for using flexible fabric formworks will be developed in a timelier manner for the design community to take full advantage of this method of forming concrete members.</fs></align> | ### |
| ~~UP~~ | <fs medium>While it’s true that a flexible fabric formwork may be used nearly anywhere a rigid formwork is used, a significant amount of research remains to be done to bring these systems into everyday practical use by the construction industry. ACI (American Concrete Institute) Committee 347 has addressed rigid formwork since 1963 but it was only recently (2005) that ACI Committee 334 introduced the construction of shells using inflated forms even though several methods of construction using inflated forms have been available since the early 1940’s. It is hoped standards and guidelines for using flexible fabric formworks will be developed in a timelier manner for the design community to take full advantage of this method of forming concrete members.</fs> |
| | ### |
| | |
| ===== Foundations ===== | ===== Foundations ===== |
| |
| {{gallery> :formwork_applications:foundations?150x150&6&showtitle&lightbox }} | {{gallery> :formwork_applications:foundations?150x150&6&showtitle&lightbox }} |
| |
| <align justify><fs medium>Foundations, continuous and spread footings and piers (or columns), have also benefitted by the use of flexible fabric systems. Since 1993 Richard Fearn, owner and founder of Fab-Form Industries, Ltd., has developed and marketed several fabric forming products including; Fastfoot® for continuous and spread footings (Figures 1 and 2); Fastbag® for spread footings (Figures 3 and 4) and Fast-Tube<sup>TM</sup> for piers and columns (Figures 5 and 6). See Fab-Form Industries’ website listed under External Links for additional information.</fs></align> | <fs medium>Foundations, continuous and spread footings and piers (or columns), have also benefitted by the use of flexible fabric systems. Since 1993 Richard Fearn, owner and founder of Fab-Form Industries, Ltd., has developed and marketed several fabric forming products including; Fastfoot® for continuous and spread footings (Figures 1 and 2); Fastbag® for spread footings (Figures 3 and 4) and Fast-Tube<sup>TM</sup> for piers and columns (Figures 5 and 6). See Fab-Form Industries’ website listed under External Links for additional information.</fs> |
| ~~UP~~ | ~~UP~~ |
| ===== Walls ===== | ===== Walls ===== |
| {{gallery> :formwork_applications:walls:unno?150x150&6&showtitle&lightbox }} | {{gallery> :formwork_applications:walls:unno?150x150&6&showtitle&lightbox }} |
| |
| <align justify><fs medium>Kenzo Unno has developed two basic fabric formwork methods, the Frame method (Figures 1 and 2) and the Quilt-Point method (Figures 3 and 4). With the frame method the net fabric is stretched over the inside surface of a braced stud wall and secured with standard form ties. The wall is vibrated externally, here by poking it with a stick. With the Quilt-Point the net fabric is secured around the perimeter and standard form ties with washers are used to tie the two layers of fabric together assuming this quilt-like wall finish is desired on both sides. Again the wall is vibrated externally.</fs></align> | ### |
| | <fs medium>Kenzo Unno has developed two basic fabric formwork methods, the Frame method (Figures 1 and 2) and the Quilt-Point method (Figures 3 and 4). With the frame method the net fabric is stretched over the inside surface of a braced stud wall and secured with standard form ties. The wall is vibrated externally, here by poking it with a stick. With the Quilt-Point the net fabric is secured around the perimeter and standard form ties with washers are used to tie the two layers of fabric together assuming this quilt-like wall finish is desired on both sides. Again the wall is vibrated externally.</fs>> |
| | ### |
| |
| <align justify><fs medium>Kenzo Unno had also gone "green" even before green was "in". With his latest formwork development, the Zero-Waste form system, his hope is to contribute to sustainable construction and a reduction in construction waste, see Figure 5.</fs></align> | ### |
| | <fs medium>Kenzo Unno had also gone "green" even before green was "in". With his latest formwork development, the Zero-Waste form system, his hope is to contribute to sustainable construction and a reduction in construction waste, see Figure 5.</fs> |
| | ### |
| |
| <fs medium>For more information on Kenzo Unno's formwork methods please see this article:{{:unno:kenzo_unno_article.pdf|Kenzo Unno Article}}</fs> | <fs medium>For more information on Kenzo Unno's formwork methods please see this article:{{:unno:kenzo_unno_article.pdf|Kenzo Unno Article}}</fs> |
| {{gallery> :formwork_applications:walls:lawton?150x150&6&showtitle&lightbox }} | {{gallery> :formwork_applications:walls:lawton?150x150&6&showtitle&lightbox }} |
| |
| <align justify><fs medium>Figures 1-6 above show the wall formwork Sandy Lawton used for the "Treehouse" for Chuck and Wendy Black's residence. Here Lawton used a geotextile fabric held in place by standard form ties and wood studs space vertically.</fs></align> | ### |
| | <fs medium>Figures 1-6 above show the wall formwork Sandy Lawton used for the "Treehouse" for Chuck and Wendy Black's residence. Here Lawton used a geotextile fabric held in place by standard form ties and wood studs space vertically.</fs> |
| | ### |
| |
| <fs large>**2009 Fabric-formed Concrete Workshop**</fs> | <fs large>**2009 Fabric-formed Concrete Workshop**</fs> |
| {{gallery> :formwork_applications:walls:2009_workshop?150x150&6&showtitle&lightbox }} | {{gallery> :formwork_applications:walls:2009_workshop?150x150&6&showtitle&lightbox }} |
| |
| <align justify><fs medium>At a 2009 Fabric Formwork Workshop held at Yestermorrow Design/Build School in Warren, Vermont students and instructors constructed two walls of a student "cabin". This workshop gave students and instructors alike the opportunity to experiment with and have a "hands on" opportunity to work with fabric-formed concrete.</fs></align> | ### |
| | <fs medium>At a 2009 Fabric Formwork Workshop held at Yestermorrow Design/Build School in Warren, Vermont students and instructors constructed two walls of a student "cabin". This workshop gave students and instructors alike the opportunity to experiment with and have a "hands on" opportunity to work with fabric-formed concrete.</fs> |
| | ### |
| |
| <align justify><fs medium>Figures 1-3 above show students and instructors assembling the 2x6 wood frames to which a translucent geotextile fabric was fixed. Figures 4-5 show the outside wall sections being placed on the continuos strip footing. Figure 6 shows the carbon fiber grid, used as the main reinforcing, being installed.</fs></align> | ### |
| | <fs medium>Figures 1-3 above show students and instructors assembling the 2x6 wood frames to which a translucent geotextile fabric was fixed. Figures 4-5 show the outside wall sections being placed on the continuos strip footing. Figure 6 shows the carbon fiber grid, used as the main reinforcing, being installed.</fs> |
| | ### |
| |
| <align justify><fs medium>Figures 7-9 show the inside wall formwork and fabric from each wall section being sown together to form pilasters. The inside and outside wall sections were tied together primarily using threaded nylon rods and metal nuts and washers. Figures 10-13 show the concrete being placed. As can be seen in Figure 13 the translucent fabric allowed one to see exactly what level the concrete had been poured to.</fs></align> | ### |
| | <fs medium>Figures 7-9 show the inside wall formwork and fabric from each wall section being sown together to form pilasters. The inside and outside wall sections were tied together primarily using threaded nylon rods and metal nuts and washers. Figures 10-13 show the concrete being placed. As can be seen in Figure 13 the translucent fabric allowed one to see exactly what level the concrete had been poured to.</fs> |
| | ### |
| |
| <fs medium>Figures 14-18 show the walls after all the concrete has been placed and before the formwork has been stripped.</fs> | <fs medium>Figures 14-18 show the walls after all the concrete has been placed and before the formwork has been stripped.</fs> |
| {{gallery> :formwork_applications:columns:cheng?200x200&6&showtitle&lightbox }} | {{gallery> :formwork_applications:columns:cheng?200x200&6&showtitle&lightbox }} |
| |
| <align justify><fs medium>Figures 1-5 above show the fabric forming Mark West used for the columns of this private villa in Culebra, Puerto Rico designed by Fu Tung Cheng of Cheng Design .</fs></align> | ### |
| | <fs medium>Figures 1-5 above show the fabric forming Mark West used for the columns of this private villa in Culebra, Puerto Rico designed by Fu Tung Cheng of Cheng Design .</fs> |
| | ### |
| |
| <fs large>**Sandy Lawton**</fs> | <fs large>**Sandy Lawton**</fs> |
| {{gallery> :formwork_applications:columns:lawton?200x200&6&showtitle&lightbox }} | {{gallery> :formwork_applications:columns:lawton?200x200&6&showtitle&lightbox }} |
| |
| <align justify><fs medium>Figures 1 and 2 show the fabric formwork, supplied by Fab-Form Industries, used for the columns in this Treehouse" for the Chuck and Wendy Black residence. Figure 3 shows the column after the formwork has been stripped.</fs></align> | ### |
| | <fs medium>Figures 1 and 2 show the fabric formwork, supplied by Fab-Form Industries, used for the columns in this Treehouse" for the Chuck and Wendy Black residence. Figure 3 shows the column after the formwork has been stripped.</fs> |
| | ### |
| ~~UP~~ | ~~UP~~ |
| |
| ===== Vaults ===== | ===== Vaults ===== |
| |
| <fs medium>See [[fabwiki:research:canada:canada_research|C.A.S.T.]] research.</fs> | <fs medium>See [[fabwiki:research:canada:canada_research|C.A.S.T.]] research.</fs> |
| | |
| ~~UP~~ | ~~UP~~ |
| |
| ===== Civil Engineering Works ===== | ===== Civil Engineering Works ===== |
| <fs medium>//Place text and photos here.//</fs> | <fs medium>//Place text and photos here.//</fs> |
